Decoding Tanbos TDR Waveforms: A Practical Guide for Field Technicians

Decoding Tanbos TDR Waveforms: A Practical Guide for Field Technicians

TDR – Time Domain Reflectometry. This technology assists field technicians in identifying issues in cables or wires beneath the ground. TDR waveforms show an electrical signal moving along a cable and reflecting off a problem. By examining these waveforms using Trace Path. 

Reading Tanbos TDR Equipment

Readouts shown on the display of the Tanbos TDR equipment are not the same. A flat line signals a cable that is open with no issues. But if you notice spikes or curves, it may indicate that there is something wrong with the cable, such as a break or a short circuit. Through close examination of these readings when in the field, you can determine the cause and location of the problem.

Correcting Tanbos TDR Waveform Issues

The Tanbos TDR Waveforms Problems The problems in the Tanbos TDR waveforms involve utilizing your knowledge of how signals travel through cables. For example, if you notice a sudden spike in the reading, there might be some water leakage and the cable is get affected by it. Using your noggin to follow the traces on the waveform using underground cable route tracer, you are able to troubleshoot and fix cables in the field, so that everything remains safe and happy.