EN
EN
It's vital to check the safety of the electrical equipment before you start using it. A typical test is referred to as a Hipot test. This is a test to make sure that the unit has no leaks in electricity. Limiting leakage current in a Hipot test can work as a protector of the equipment and the user.
Since a Hipot test is a testing method that applies high voltage to devices under test in order to perform a dielectric test on the devices, it is necessary to set a leakage current limit in the Hipot test, so as to prevent an electric hazard. Leaking electrical equipment can be very hazardous if people are using it. By restricting during testing how much current can leak out, we can ensure that the equipment is safe.
In order to determine the leakage current limit that is right for your Hipot test, 11kv cable fault locator consider the kind of equipment you are testing and where it will be used. Other gear may have different limits depending on the type and what it is designed for. It is useful to ask experienced professionals, such as those at Tanbos, for assistance in determining the appropriate limit for your test.
Leakage current limits are crucial when conducting a Hipot test and serve to maintain the safety and reliability of the electrical equipment. So all we need to do is limit the amount of leakage current allowed to stop dangerous problems when faulty equipment occurs. That’s just another way in which leakage current limits serve to protect both the equipment and the people who use it.
One mistake that is often made is the leakage current limit may be set too high or too low. A high limit might allow too much leakage current, cable fault detection making it potentially unsafe for users. If it’s set too low, false failures and non-required repairs can occur. You must be careful when considering what limit is appropriate for your test in order to steer clear of these mistakes.
AR
HR
CS
NL
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
TL
IW
ID
SR
SK
UK
VI
ET
HU
TH
TR
FA
MS
GA
HY
AZ
UR
BN
LA
MN
KK
